10 % RH to 95 % RH in the temperature range –10 °C to 70 °C.
(For special instruments, we can offer calibration in the temperature range –40 °C to 85 °C.)
10 %RH to 95 %RH and –10 °C to 70 °C → U = 0.4 %RH to 1.2 %RH
Measurement uncertainty depends on the instrument being calibrated. The uncertainty is expressed as an interval which, assuming a normal distribution, corresponds to a confidence level of approximately 95% (k = 2).
The Norwegian Metrology Service reports measurement uncertainty according to the method described in “JCGM 100:2008, Evaluation of measurement data – Guide to the Expression of Uncertainty in Measurement (GUM)”.
The instrument is calibrated by comparison with a reference dew-point mirror and a reference thermometer. The instrument under calibration is placed in a climate chamber that is regulated for reference temperature and humidity. The calibration is carried out by comparing the temperature and calculated humidity values from the reference instruments with those shown by the instrument under calibration.
Results for each test point are reported as the mean value of at least ten readings taken over a 10-minute period, for both increasing and decreasing measurement sequences.
When ordering calibration, the customer must state the dew point or the temperature and relative humidity at which the instrument is to be calibrated.
All customers have the right to submit a complaint if they are dissatisfied with a calibration service from the Norwegian Metrology Service. Complaints may be submitted in writing or verbally, and are handled impartially and constructively.
Procedure:
Send written complaints to postmottak@justervesenet.no.
Yes. We offer calibration agreements for customers seeking predictability and efficiency. Through such an agreement, we plan calibrations in advance and schedule your equipment for fixed intervals. Delivery time and price are agreed in advance and stated in the order confirmation before work begins. For customers with several similar instruments, we can arrange batch calibration and provide discounts for efficient execution. Please contact us to discuss a customised agreement.
You can order calibration by contacting the Norwegian Metrology Service via email, telephone or our order form. We are happy to help you identify the correct service and provide practical information on how to send in your instrument.
The price depends on the type of instrument and the scope of the assignment. You can find indicative prices in the Norwegian Metrology Service’s price list.
After calibration, you will receive a calibration certificate documenting the measurement results, uncertainty and references used. The certificate also shows traceability to national or international standards and may be used for audits or quality assurance.
The calibration interval should be based on the required accuracy, frequency of use, and the consequences of potential measurement errors. Instruments used frequently, under demanding conditions, or for critical measurements should be calibrated more often than those used rarely or under stable conditions. For instruments used in commercial transactions, legal control intervals may be set by regulation. For other types of instruments, recommendations can be found in Norwegian Accreditation guidelines (e.g. NA-Dok 26a for scales) and international documents such as ILAC-G24.
We recommend assessing your specific needs and contacting us for advice on calibration intervals suited to your instruments and applications.
When you order a calibration, we first agree on the instrument type and the tests required. You then send the instrument to us, or we arrange on-site calibration if necessary. Our experts perform the calibration in accordance with international standards, and you receive a certificate showing the results, uncertainty and traceability. The instrument is then returned to you safely.
Phone:
64 84 84 84
E-mail:
postmottak@justervesenet.no
Contact form:
Fill in our contact form, and we will respond as quickly as possible.
Go to contact form
Sider: